9
Connect to a Computer for File
transfer
You can connect your
First Order stormtrooper
TM
/BB-8
TM
smartwatch
to a PC or Mac computer using the included micro USB cable. Once
connected, you can transfer files between the watch and your computer.
Please follow these steps to make the connection:
•
Make sure the
Master Power switch
on the smartwatch is in the
On
position
.
• Pull up the rubber cover of the
Micro usB Port
on the side of your watch.
• Insert the micro USB cable (small end) into the
Micro usB Port
on the watch.
• Insert the larger end of the micro USB cable into a USB port on the
computer. A USB port is usually marked with this symbol
.
• You will see a removable drive called
Vtech 1942
. Please use this to
transfer files to and from the watch. There is another removable drive
called
Vt sYsteM
, which is for storage of system data and should not
be accessed by users.
note:
Once the watch is connected to your computer, do not disconnect
it while transferring files. Only once you have finished transferring files
do we recommend you to eject and unplug the watch.
To avoid any potential damage to your smartwatch, ensure that the
rubber cover is fully covering the
Micro usB Port
of the watch whenever
possible.
to Backup Photo or Video Files taken by the smartwatch:
• Locate and open the
dCiM
folder in the removable drive
Vtech 1942
.
• Your photo and video files will be located in a subfolder. Drag and drop
or copy and paste the files to a location on your computer to back
them up.
to Backup Voice Files taken by the smartwatch:
• Locate and open the
VOiCe
folder in the removable drive
Vtech 1942
.
• Drag and drop or copy and paste the recorded voice files to a location
on your computer to back them up.
