18
(iv) auto screen Off
Allows you to set the Auto Screen Off timer. Tap the left and the right
arrow for selection, then tap the Check icon
to confirm.
The selection Disable Auto Screen Off will not turn off the screen,
but the screen will dim if there is no input for 30 seconds in Clock
Display mode to save power. At this time, operation of the watch will
be limited to showing the time. No other function will be operational,
including 3D-style clock face effects.
tips:
If the Auto Screen Off time is set to one of the longer times,
the battery consumption will increase and the time the battery lasts
between charging will be reduced.
(v) indoor Light Frequency
Here you can set the AC power frequency according to the region
you're in while travelling. If it is not set correctly, you may see some
flickering on the camera/video preview screen and the captured
photos and videos when used in artificial lighting conditions.
(vi) Factory reset
Factory Reset will erase the contents stored in the memory and
reset all system settings to factory default. Follow the instructions on
screen to confirm the action.
Care & Maintenance
1. Keep the rubber cover of the
Micro usB Port
closed tightly while it is
not in use in order to prevent dirt or water from getting inside.
2. Keep the watch clean by wiping it with a slightly damp cloth.
3. Keep the watch out of direct sunlight and away from any direct heat
source.
4. Do not drop the watch on a hard surface and do not expose it to
moisture or immerse it in water.
5. Keep the lens clean. If the pictures taken are blurry, it could be because
there is dirt on the lens. You can clean the lens by:
• Blowing on the lens.
• Gently wiping the lens with a dry cloth.