VTech AM18447 User Manual Download Page 33

Page: 33 / 122

Announcement (general mailbox)

An announcement plays when calls are answered by the general mailbox.
The system has a default announcement,

“Hello. This is the general mailbox.

Please leave a message after the tone.”

You can use this announcement or

record your own.
You can record an announcement up to 90 seconds.

To record the general mailbox announcement:

When the console is idle, press

MENU

/SELECT

Press or to scroll to

Ans sys setup

, then press

MENU/

SELECT

/SKIP

Press

MENU/

SELECT

/SKIP

to select

Gen MB setup

Press or to choose

Anncment setup

, then press

MENU/

SELECT

/SKIP

The pointer (

) indicates whether the default or user-recorded

announcement is used currently. Press or to scroll to

User anncment

then press

MENU/

SELECT

/SKIP

If you have recorded your own announcement before, press or to
scroll to

Change

, then press

MENU/

SELECT

/SKIP

6. Press

MENU/

SELECT

to start recording. Lift the handset or face the console

to record your announcement.

7. Press

MENU/

SELECT

again to stop recording. You hear the playback of the

recording.

8. Press or to choose

to save the recording, or choose

Change

record again if desired. Press

ress

MENU/

SELECT

/SKIP

1.
2.

3.
4.

•

Answering system basic setup

General mailbox setup

Summary of Contents for AM18447



























































































































Search results

Summary of Contents for AM18447

Reviews:

VTech AM18447, User Manual, Page: 33 / 122

Search results

Summary of Contents for AM18447

Reviews: