38
IN CASE OF DIFFICULTY
Y O U H E A R N O I S E I N T H E
HANDSET, AND NONE OF THE
KEYS OR BUTTONS WORK.
• Make sure the power cord is plugged
in.
• Your base unit and handset may not
be operating on the same channel
or security code. Place the handset
in the cradle for a few moments to
reload the security code and reset
the channel.
COMMON CURE FOR ELECTRONIC
EQUIPMENT
Electronics, like people, can sometimes
get confused. If the unit does not seem
to be responding normally, then try
putting the handset in the cradle to re-
initialize the unit. If it still does not seem
to respond, perform the following steps
(in the order listed):
1.
Disconnect the power to the base.
2.
Disconnect the handset battery.
3.
Wait a few minutes.
4.
Connect power to the base.
5.
Connect the handset battery.
6.
Put the handset in the base to re-
initialize.
