24
Audible Indicators
This system gives you voice prompts for feature operations and voice
confirmations when you press a button or complete an operation.
Setting Date/Time
1.
Make sure the answering system is on.
2.
Press
TIME/SET
. The system announces the clock setting then an
nounces;
“To set Date and Time, press TIME/SET
.”
3.
Press
TIME/SET
.
4.
Press
SELECT
until the system announces the correct day, then press
TIME/SET
.
5.
Press
SELECT
until the system announces the correct hour, then
press
TIME/SET
.
6.
Press
SELECT
until the system announces the correct minutes
(press and hold
SELECT
to
advance by 10), then press
TIME/SET
.
The system announces the current clock setting.
About Mailboxes
This answering system has three voice mailboxes. Callers using a touch
tone phone can select the mailbox in which their messages will be
recorded by pressing
1
,
2
, or
3
. All other messages will be recorded in
Mailbox 1.
About Announcements
•
You can record up to two different announcements — one for normal
answering and one for when you’ve set the system to play the announcement
only.
•
Use normal answering when you want the system to record callers’
messages. Use Announce Only when you want to give information to
callers without accepting messages.
•
If you choose not to record an announcement, the system answers with
a pre-recorded announcement.
•
The normal answering pre-recorded announcement says: “Hello. I’m unable to
answer your call right now. Please leave your name, number and a
message after the tone.” The Announce Only pre-recorded announcement
says: “Hello, I’m unable to answer your call right now. Please call again.
Thank you.”
•
By setting Announce Only to ON or OFF, you decide which announcement
your callers will hear when the system answers a call (the system comes
set for normal answering , with Announce Only turned off). See “Set
Announce Only” , located in the Feature Summary chart later in this sec-
tion, to change your announcement selection.
ANSWERING SYSTEM OPERATION
AT THE BASE
