4
INSTRUCTIONS
BAttERY INStALLAtION
1. Make sure the unit is turned
OFF
and
the battery cover, battery box and unit
are all dry.
2. Locate the battery cover on the back
of the unit. Use a screwdriver to loosen
the screws.
3. Install 4 new AA (AM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover. When closing the battery cover ensure that the screws are
securely tightened. This will avoid any water leakage.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
Instructions
