6
For better suction, we suggest
wetting the suction cups before
attaching them to the wall. Press
the suction cups onto the wall
and flip the tabs out to secure the
suction cup support unit. Once the
unit is attached to the wall, test the
strength of the suction by pulling
gently on the unit. The suction
cups may not stick properly to
textured tiles. We recommend that
the unit be removed from the wall
after each use as the strength of
the suction cups cannot support
prolonged use.
3.
To remove the whale from the
suction cup support unit, press
the release buttons on either side
of the bubble spout and pull gently
on the whale.
4. To remove the suction cup support
unit from the wall, flip the tabs on the
suction cup support unit towards the
centre.
WARNING:
to prevent the risk of injuries, do not attach the Vtech
®
Bathtime
Bubbles Whale any higher than a child’s head height when sitting
in the bath.
Pr
oduct Assembly
