VTEC VC-366GSM&GPS, User Manual

Page: 5 / 14

A
、
1
、
Activated car anti-theft mode”
；
operations succeed instruction : “ Car locked and anti-theft
activated. ”
Mainframe will “bi” once, direction lights will flash once at the same time, car center control is locked;
System is in the activated mode.
B
、
“ 2
、
De-activate car anti-theft mode ”
；
operations succeed instruction: “ Car unlocked and anti-theft
deactivated
；
Mainframe wills “bi” two times, direction lights will flash twice at the same time, car center control is
unlocks; System is in the de-activated anti-theft mode.
C
、
“ 3
、
Enable car operation ”
；
operation succeed instruction: “ Enable car operation Operation OK ”
；
System is activated the restrictions for the car power cut off. The engine power supply is recovered.
D
、
“ 4
、
Disable car operation ”
；
operation succeed instruction : “ Car operation already stopped ”
；
Be careful when using this car power cut off function. This is to prevent the traffic jam; after setting
this function, remote controller will be unable to control automatically; if wished to recover back the power
supply and the remote controller, please press 7 to enter the second menu and press 3 to activate the
remote controller.
E
、
“ 5
、
Monitor car status ”
；
operation succeed instruction: “ Monitor car status Operation OK ”
System connected with car microphone, users can monitor the inside car activity via phone.
F
、
“ 6
、
Call in car ”
；
operation succeed instruction: “ Call in car Operation OK ”
；
After activated this function, you can talk with the person who inside the car
G
、
“ 7
、
Set other system functions ”
；
after operation, enter to the other system functions menu
H
、
“ 8
、
Alarm number and password settings” after operation, enter to the alarm setting menu
I
、
“ 9
、
Inquire about car current position”
；
System will broadcast the car current longitude and latitude, latitude is in the front while
longitude is in the back
J
、
“0
、
Inquire about car working conditions”
After operation, system will according to the alarm report status or current working mode to give
the instructions
：
“ Violent shock alarm during car anti-theft”
“ Unauthorized car opening alarm “
“ Unauthorized started the car engine”
“ Car power cut off alarm”
“ Car owner is in danger and request for help “
If system doesn’t have the alarm report, this is indicates the current working mode
5