VST easyDAB+5, User Manual

Page: 9 / 40

VST 5 User Guide
6
OPERATION CONTROLS
In-Car Audio System LCD Display
The 5 unit is operated by using a remote controller; the system messages from the
remote control operation are converted to RDS text and displayed as 8 characters display on the
LCD screen of your in-car audio system. Below is a list of 5 system messages displayed
on the in-car audio system LCD display, while operating with the remote control:
Messages Description
DABRADIO Display after 5 is powered on.
station name Display the 8-character short service name of the DAB station.
TUNING Indicate tuning a DAB station is in progress.
RESETING Indicate performing a DAB reset or factory reset is in progress.
DONE Confirm completion for certain system operation, i.e., set a DAB preset mode.
RETUNING Indicate FM transmitting frequency is being retuned to a new frequency.
TO frequency
Indicate 5 is changing FM transmitting frequency to a new frequency from a
manual setting.
AF frequency
Indicate 5 is changing FM transmitting frequency to a new frequency from the
AFC function. Other than press and hold the BACK key, any remote control keys pressed
is ignored before the change is completed.
POWEROFF Display after 5 is turned off (into the standby mode).
RC LOW Indicate remote control’s battery is low, battery change is due.
Remote Control
The remote control has a Rotary Knob, 6 control buttons, and 4 buttons’ functions (press the
Rotary Knob and then the control button). Please refer to the sections,
USING REMOTE
CONTROL KEYS
,
MENU SETTINGS,
and
FM TRANSMITTING FREQUENCY SETTINGS
for detail description of each operation.