VST easyDAB+5, User Manual

Page: 18 / 40

VST 5 User Guide
15
TROUBLESHOOTING
Please read this user manual carefully before using the VST 5 In-Car DAB Adapter. If you
still have difficulties to use this unit, this section gives some of the most likely solutions to the
problems you might have.
Q: I cannot find any DAB stations.
Ensure that DAB coverage exists in your area. Please visit
www.worlddab.org
or
www.digitalradionow.com
to check for DAB coverage. For Norway visit
https://radio.no/dekning/
Q: I can find DAB stations, but I cannot get any sound.
Make sure that the car radio is not mute; check the volume settings of the car radio.
Q: I forget the FM transmission frequency setting of 5.
Press LINK key the screen will show the current FM Transmitting frequency.
Q: I cannot hear DAB program when I start up my car and turn on the car radio.
Check the following:
1.
Follow the instruction on the section STARTING UP THE SYSTEM to initialize the FM
transmitting frequency on 5 and the car radio.
2. Make sure 5 is not in the Auxiliary mode, please refer to
To Set the Auxiliary input
mode
to check and return to DAB mode.
Q: While listening to a DAB station, I lost reception suddenly and hear static noise or a FM
program
1. Check if 5 station information shows
《
POOR SIG
》
or
《
UNAVAIL
》
, if so, you
may be leaving the signal coverage area, please refer to
To Listen to the DAB stations
to
select another station. Also, the station may be unavailable temporarily as you drive into a
tunnel.
2. If 5 is in AFC mode, the FM transmitting frequency for 5 and the car radio
listening Frequency maybe out of sync. To reset them, do the following:
a) Reset to 87.6MHz
Operating on Car Radio
♦
Press FM preset of your car radio to the frequency 87.6MHz if you have previously
saved for DAB reception. Otherwise, tune the car radio to FM frequency 87.6MHz
manually.
Operating on 5