4. A full charge will provide approximately 40 minutes use
5. Once the clipper is charged, unplug the adaptor from the mains
and disconnect from the appliance.
6. The appliance is now ready for use.
In order to maintain the optimum capacity of the rechargeable
batteries, the appliance has to be fully discharged every 3 months
approximately. Then recharge the appliance to full capacity, again
for 16 hours.
BEFORE USE
Always inspect the appliance before use to ensure the clipper head
is free from hair, debris, etc and is running smoothly.
OILING
IMPORTANT! It is highly recommended before each use to oil
the blades with the oil provided. This ensures optimum cutting
performance. For best performance, use on clean, dry hair that has
been combed until tangle-free. Ensure the appliance is sufficiently
charged or plugged into the mains.
Using the oil supplied with the product, unscrew the cap and cut
off the very end of the plastic tube with a pair of scissors to release
the oil.
To oil the blades ensure the unit is switched on. Gently squeeze the
oil tube and apply 2 drops of oil onto the blades. Leave the unit
on for a further few seconds to allow the oil to thoroughly spread
across the length of the blades. Switch off the unit and remove any
excess oil by gently dabbing with a cloth.
Summary of Contents for VSM2330A
