VS Sassoon VSM2330A, Manual

Page: 22 / 28

REMOVING THE TRIMMER HEAD
•
Ensure the trimmer is switched off before changing the attachment
heads.
•
To remove a trimming head, twist the top section of the trimmer
(the trimming head attachment) to the right, until the line ‘I’ on
the base of the trimming head attachment is positioned above
the line ‘
É ’ on the top of the trimmer, then pull straight off.
•
To attach a trimming head, position the line ‘I’ on the base of the
trimming head attachment above the line ‘
É ’ on the top of the
trimmer. Then simply twist the head to the left until it clicks into
place. The line ‘I’ should be positioned above the ‘o’ mark on the
top of the trimmer.
Note: make sure the motor spindle is in the actuator arm after
reassemble the head
T
he motor spindle is located in the
actuator arm after reassemble the head
TRIMMING
To trim hair:
• Hold the trimmer with the teeth of the trimmer pointing upwards,
yet flat against the skin.
The motor spindle is located in the actua-
tor arm after reassemble the head