VS Sassoon VSM2330A, Manual

Page: 12 / 28

CLEANING & MAINTENANCE
After each use, clean the head as follows:
1. Switch the clipper off or unplug if mains operated.
2. Remove the head from the clipper as shown below (fig 1).
3. Using the cleaning brush, gently brush and blow any hairs from
the blade and head.
4. Replace the head as shown below (fig 2). Make sure that the
taper lever is set to the lowest position before replacing blade.
5. Do not disassemble the blades for cleaning.
When used regularly, it is advisable to oil the blades before use.
After cleaning, switch the appliance on, and oil the blades by
adding a few drops of the oil supplied over the blades. Only use
the lubricating oil supplied with this appliance as this is specifically
formulated for high speed clippers and does not evaporate or slow
the blades.
Fig. 1
Fig. 2