13
RADIANCE ROTATING HOT-AIR STYLER
CLEANING & MAINTENANCE
Blocked or clogged air intake vents will cause the styler to overheat.
The rear filter should be checked & cleaned on a regular basis - to
help maintain optimum performance & prevent overheating.
Unplug the styler & allow to cool completely before cleaning or
storing.
• Holding the handle of your styler firmly, click down to open the rear
filter at the base of the styler.
• Using a soft brush, clean any hair & other debris that may build up
in the filter.
• Replace the rear filter by pushing back into position
If overheating occurs, an automatic safety device will shut the styler
or the heat off to prevent damage or personal injury. If the styler or
heat turns off, unplug the cord & allow the styler to cool for 15 minutes
before restarting. Make sure the air vents are 100% clean .
SEE AMAZING, BE AMAZING
For all our style tutorials
check us out online
vssassoon.com.au
