THE RUGGED COMMANDER / TOOL TIPS
9
USING THE 3 POSITION TAPER CONTROL
DEFINE YOUR LOOK!
The 3 position taper control (located on the rear of the handle) is ideal for
blending layers & a precise close trim, everytime. The taper control eliminates
the need in some situations for a comb attachment because it lets you gradually
adjust the closeness of the cut.
To use the taper control:
1. For closest cut and shortest hair, slide the switch all the way down to level
#3. This is the setting to use for the 2-day shadow look and will trim to
0.6mm length.
2. To increase the cutting length, slide the switch up to level #2 - this will
trim to 1.1mm length.
3. To increase cutting to the longest length, slide the switch to level #1 - this
will trim to 1.5mm length.
