VS Sassoon THE CREW CUT ELITE, Tool Tips

Page: 8 / 32

THE CREW CUT ELITE / TOOL TIPS
8
for longer than 20 minutes.
- WARNING: If the charging light suddenly starts to flash rapidly (more than
3 flashes per second), the appliance is faulty. If this happens, please stop
charging and remove the adaptor from the outlet and contact our customer
care center for further advice (see the warranty section of the information
booklet).
OILING THE BLADES
To get the sharpest, more precise cut, it is highly recommended to oil the blades
before each use.
Using the oil supplied with your new tool, unscrew the cap & cut off the very
end of the plastic tube with a pair of scissors to release the oil.
Switch your tool on, gently squeeze the oil tube & apply 5 drops of oil around
the circular blades. Leave the tool on for a further few seconds to allow the oil
to thoroughly spread around the entire circumference of the blades. Switch off
the tool & remove any excess oil by gently dabbing with a cloth.
TO GET THE SHARPEST, MOST PRECISE CUT,
IT IS HIGHLY RECOMMENDED TO OIL THE BLADES
BEFORE EACH USE.