VS Sassoon THE CREW CUT ELITE, Tool Tips

Page: 7 / 32

7
THE CREW CUT ELITE / TOOL TIPS
PREPPING YOUR
NEW TOOL
CHARGING
The Crew Cut Elite is so easy to use – it’s as easy as moving your hand around your
head. But before you start using your new tool, you must take the time to charge it
for
3 hours before its first use. Your new tool comes with a small amount of charge,
but even if you want to use it plugged straight into the mains, the initial super charge
ensures optimum power performance to give you smooth fast cutting, every time.
- Before using for the first time, fully charge your new tool
continuously for 3 hours.
- Maximum battery capacity will only be reached after 3 charging
& discharging cycles.
- Ensure your new tool is switched off.
- Insert the small plug on the charging adaptor into the socket on
the side of your new tool.
- Plug the charging adaptor into a suitable mains power socket.
- This product has three LED lights that indicate battery capacity when charging or
discharging:
• When all three lights are illuminated blue, it indicates 100% battery capacity.
• When two lights are illuminated blue, it indicates 70% battery capacity.
• When one light is illuminated blue, it indicates 40% battery capacity.
- When the tool is about to run out of battery,the last charging indicator will flash to
indicate that you have less than 15% battery capacity remaining.
- A full charge will supply 90 minutes cordless runtime.
- A quick charge of 30 minutes will supply 15 minutes cordless runtime.
- To maintain optimum capacity of the li-ion battery, it is highly recommended to
fully discharge & then recharge your tool for 3 hours every 6 months.
- When using connected to mains power, the tool should not be used