VS Sassoon THE CREW CUT ELITE, Tool Tips

Page: 14 / 32

THE CREW CUT ELITE / TOOL TIPS
14
CHANGING THE CUTTING LENGTH
The comb guide will be marked with its grade setting. In order to change the grade
setting, depress down and hold the comb guide locking mechanism located on the side
of the rotary clipper attachment (Fig. 5) & rotate the comb guide either clockwise or
anti-clockwise as appropriate (Fig. 6). Line up the grade setting you want with the
‘I’ mark on the rotary clipper attachment.
Make sure that the locking mechanism
is in the locked position & the comb guide is securely in place before using the
clipper.
GOOD TO KNOW!
The Crew Cut Elite can also be used without the comb guide for an even shorter
crew cut. This will cut at a length of 1.0mm.
REMOVING THE COMB GUIDE
To remove the comb guide depress down and hold the comb guide locking mechanism
found on the side of the rotary clipper attachment (Fig. 5) & rotate the comb guide
in an anti-clockwise direction (Fig. 6) until it is completely free of the rotary clipper
attachment.
Fig. 6
PUSH
ON
OFF
PUSH
DOWN
PUSH
DOWN
PUSH
ON
OFF
PUSH
DOWN
PUSH
DOWN
Fig. 5
Comb guide locking
mechanism release
- depress down
and hold to release