PRO METAL SERIES MULTI GROOMER / TOOL TIPS
22
CLEANING THE FACIAL FOIL SHAVER HEAD
WARNING! Be careful not to push on the foils, they are delicate and can easily be
damaged.
• Remove the foil frame from the facial foil shaver head for cleaning as shown in Fig. 1
above.
• Rinse the shaver cutter and foil frame under running water or in a sink. Do not use hot
water. Use only warm or cold water.
• After wet cleaning, allow the foil frame and cutters to air-dry before closing the foil
frame and shaver head. Replace shaver head back onto the shaver until it clicks into
place (Fig.2).
• Wipe the surface of the main unit with a dry towel.
Do not dry the foil area. Let the
shaving head air-dry.
• The cutter can also be cleaned with a cleaning brush.
• If the body of the shaver becomes dirty, wipe off with a damp cloth and mild detergent
or soap.
NEVER use thinners, other solvents or any harsh cleaners.
CAUTION
1. When shaking off excess water, hold the main unit firmly to prevent releasing the
head assembly or dropping the units.
2. Do not use a dryer or heater to dry the shaver. This may result in malfunction or
damage to the shaver.
1.Press
2.Pull
1.Press
2.Push
Fig. 1
Fig. 2
