PRO METAL SERIES MULTI GROOMER / TOOL TIPS
7
PREPPING YOUR
NEW TOOL
CHARGING
The PRO METAL SERIES MULTI GROOMER is so easy to use. But before you start using
your new tool, you must take the time to charge it for 3 hours before its first use.
Your new tool comes with a small amount of charge, but the initial charge will ensure
your new tool will have optimum power performance to give you smooth fast cutting,
every time.
• Before using for the first time, fully charge your new tool continuously for 3 hours.
After the first charge a full charge will take 3 hours.
• Maximum battery capacity will only be reached after 3 charging & discharging
cycles.
• Use the provided USB cord & wall adaptor & the charging stand to connect the
appliance to main supply, or connect the PRO METAL SERIES MULTI GROOMER directly
to the mains supply using the USB cord & wall adaptor.
• The adaptor supplied can be used for worldwide voltage 100-240V. A plug adaptor
suitable for the country will be required.
• The USB cable can alternatively be plugged directly into a direct USB port for
charging.
• There is an LED strip that runs up the left hand side of the trimmer. This has 5
battery level indicators on the top of the strip as per Fig 1. on the next page.
• When charging the trimmer, a blue LED light will continuously run up the product to
indicate the trimmer is charging.
