THE ELITE CLIP / TOOL TIPS
9
HOW TO USE
THE ELITE CLIP
OILING THE BLADES
To get the sharpest, most precise cut, it is highly recommended to oil the blades
before each use.
• Using the oil supplied with your new tool, unscrew the cap & cut off the very end
of the plastic tube with a pair of scissors to release the oil.
• Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto the
blades. Leave the tool on for a further few seconds to allow the oil to thoroughly
spread across each of the blades. Switch off the tool & remove any excess oil by
gently dabbing with a cloth.
BEFORE USING
• Always inspect the clipper blades for noticeable signs of damage.
• Always inspect the clipper blades before use to ensure they are free from hair,
debris etc.
• Ensure the clipper is sufficiently charged before use.
• For best performance use on clean hair that has been combed until tangle-free.
NOTE –
The Elite Clip can be used on wet, thick and longer hair types, but always
make sure hair is well-combed before clipping.
5 POSITION TAPER CONTROL
The 5 position taper control for is designed for blending layers & a precise close
trim, everytime. The clipping lengths are marked on the side of the clipper.
• To increase the cutting length, push the lever down. This will cut at the longest
length = 3.0mm.
• To reduce the cutting length, push the lever up. This will cut at the shortest
length = 0.6mm.
