THE ELITE CLIP / TOOL TIPS
14
CLIPPER CLEANING &
MAINTENANCE
Because the clipper blades are precision made for a very special use, they
should always be handled with care. To ensure long-lasting performance of your
clipper, it is important to clean the the comb guides after every use.
After each use, clean the clipper blade set as follows:
1. Switch the clipper off or unplug from the power outlet if it is charging.
2. Using the cleaning brush, gently brush and blow any hairs from the blade set
and head of your clipper.
3. Attached the provided blade guard to protect the teeth from any damage
whilst storing.
The Elite Clip blades are carefully inspected to ensure that they are in perfect
alignment.
NOTE: the blades DO NOT need to be unscrewed and removed for regular
cleaning.
Of course you will need to realign the blades after removal for thorough
occasional cleaning or replacement, or if they are knocked out of alignment.
How can you tell if the blades need realigning? Simply match them up, point to
point, using the following instructions.
1. Using an philips head screw driver, remove the two screws from the large
fixed blade and detach this blade.
DO NOT MISPLACE THE SCREWS
.
Once both screws are removed, the large top blade should come away from the
clipper. The small bottom blade should be positioned on the white plastic blade
cushion.
NEVER REMOVE THE WHITE PLASTIC BLADE CUSHION
.
2. Remove the blades carefully noting which way round they are fitted. This will
help with re-assembling.
3. Now brush away the hair and other debris from the interior of the cutting
head and blades.
4. Re-assembly is simply the reverse of the above instructions. To re-assemble,
