background image

Beverage Cooler 

 |   4

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce 
the risk of explosion, fire, electrical shock, and/or injury to persons. If physical injury or damage is 
caused by failure to follow these instructions, the warranty does not apply.

•   Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of 

obstruction.

•   Do not store explosive substances, such as aerosol cans with flammable propellant, in this 

appliance.

•  Do not use extension cords or ungrounded (two-prong) adapters.
•   This appliance is intended to be used in households and similar applications, such as staff 

kitchen areas in shops, offices and other working environments; hotels, motels and other 
residential type environments; bed and breakfast type environments; catering and similar 
non-retail applications.

•   Do not pull the power cord when pulling the power plug of the beverage cooler. Please 

firmly grasp the plug and pull it out from the socket directly.

•   The refrigerant of this product is R600a, which is flammable. Make sure not to damage the 

cooling system during transportation and installation.

Warnings related to electricity

•  Do not damage the power cord under any condition.
•   This appliance must be grounded due to the event of an 

electrical short circuit.

•   This appliance is equipped with a grounded wire and a 

grounded plug. Plug into a properly installed grounded 3 
prong outlet.

•   The beverage cooler uses an AC power supply of 120V/60 Hz.
•   For your safety, don’t place electric devices on top of the cooler, like microwaves or 

electric kettles, and don’t store your beverage cooler inside pantries.

Warnings related to use

•   Make sure the cooler is placed in a well-ventilated, indoor environment on flat, sturdy 

ground (rotate left or right to adjust the wheel to level if unstable).

•  Be careful not to get fingers or dangling accessories caught in the cooler door.
•   This cooler and its packaging are not intended to be played with or used by children. If 

a child is using the cooler, it must be with adult supervision to avoid injury.

•   Keep the cooler out of moist, damp, or humid environments and situations, so as not to 

damage the electrical insulation.

•  Do not use a base, cooler door, etc. as pedal or support.
•  Do not place heavy objects on top of the cooler to prevent accidental damage or injury.
•   Do not use this cooler to store fresh foods, such as meats, vegetables, fruits, etc. This 

product can only be used to chill beverages.

Summary of Contents for VRM050660N

















Reviews: