Vremi VRM050660N, Manual

Page: 7 / 16

Beverage Cooler | 7
Operating Instructions
INSTALLATION
Warning: Excessive Weight Hazard
Use two or more people to move and install beverage cooler. Failure to do so can result in
back or other injury.
• Keep in upright position for 24 hours before initial power up.
• While the cooler is empty, set the Temperature Control to maximum and leave for 1
hour.
• Follow steps below if you want to change the door orientation from left-hinge to right-
hinge:
1. Remove top hinge cover and 3 top hinge screws which are below it. Then remove top
hinge.
2. Remove 1 cabinet plug and 1 door handle plug.
3. Remove the door.
4. Remove right and left leveling legs.
5. Remove the bottom hinge and 3 bottom hinge screws.
6. Install the bottom hinge on the other side of the leveling legs with 3 bottom hinge
screws.
7. Install right and left leveling legs. There are two holes below the beverage cooler to fit
the two leveling legs.
8. Install the door.
9. Install the top hinge on the other side with 3 top hinge screws.
10. Install top cover above the top hinge and install 1 cabinet plugs on the other side.
11. Adjust the leveling legs.