Preparing for Installation
1-1
Chapter 1
Preparing for Installation
This chapter includes safety, environmental, and equipment requirements, as
well as guidance in planning the VSU-5000 installation.
Safety Recommendations
When using the VSU-5000, follow these safety guidelines:
•
Keep the chassis area clear and dust-free during and after installation.
•
Keep the VSU-5000 ventilation gratings clear of any blockages.
•
Do not rest equipment in excess of 10 lbs. on top of the VSU-5000 chassis.
•
Disconnect all power before doing the following:
•
Changing the Ethernet or serial port connection
•
Removing a chassis
•
Never assume power is disconnected from a circuit. Always check.
NOTE:
The VSU-5000 is enclosed in a tamper-evident case that meets U.S.
NIST FIPS 140-1 Level Physical Security and may be replaced only by an
authorized service technician.
General Site Requirements
This section describes the requirements your site must meet for safe installation
and operation of your system. Ensure that your site is properly prepared before
beginning installation.