●
Remove the Prime Signature motor and place it in the cutout to the left. Be careful not
to hit or damage the motor pulley. It me/- .0005” when it was tested at the
factory.
Setting up the Signature 21
●
Make sure your shelf / top-plate that your Signature 21 is sitting on is level.
●
Remove the turntable platter from the bottom of the box in “
Cushion #1
”.
●
Peel the tape off the bearing hole under the platter.
●
Remove the protective cap on the spindle to lower the platter on the Signature 21 spindle.
●
Place the black drive belt around the platter and motor pulley, when you spin the platter it
will self correct.
●
33 & 45 RPM Speeds are adjusted using the two-step pulley. Adjust your belt accordingly.
●
We recommend placing your Signature 21 turntable on any 3 party Isolation turntable
top-plate. Any sturdy top-plate and stand that can support the weight will do.
Note: The better the isolation for your turntable the better the sound.
