34
Trail Tech Voyager
GPS Settings:
The GPS settings control map and logging
behaviors.
Voyager can gather speed and distance data in
two ways. By default Voyager uses the wheel
sensor for accurate SPD/DST data.
Alternately, select GPS data from satellites
to determine speed/DST. GPS speed data is
generally very good and accurate. Over time
it can cause innaccuracy due to unavailable
GPS signal, fast small vertical movements (e.g.
whoops/ruts) or fast technical cornering (e.g.
wooded trails.)
GPS > Speed/DST:
Menu »
Set Menu
Voyager defaults to “ENG or WHL” so that
Accumulated Run Time (the total time the
vehicle has been running) only increments when
the wheel is rolling or the engine is turned on.
You can change it to increment when GPS
thinks it is moving. Over time this will cause
inaccuracy due to GPS signal wander.
ART will not increment if Voyager falls into sleep
mode. By default, this will not happen because
wheel and engine activity will keep Voyager
awake.
GPS > Accumulated Run Time:
Summary of Contents for Trail Tech
Page 1: ...MOTO GPS...