33
Trail Tech Voyager
The power settings let you choose the behavior
of the backlight, power-saving and charging.
Power Settings:
Choose the brightness of the backlight, 0-100%.
Power > Backlight > Brightness:
Set the amount of time the backlight stays lit
(since the last button press or wheel movement)
when running off the internal battery.
Power > Backlight > Timeout (BAT):
Set the amount of time the backlight stays lit
(since the last button press or wheel movement)
when connected to the external vehicle battery.
Power > Backlight > Timeout (EXT):
Set the amount of time to wait (after the last
button press) until Voyager enters sleep mode
when on internal battery. During sleep mode,
the screen is blank and Voyager conserves
power.
Power > Power-Save > Sleep (Battery):
Power > Power-Save > Sleep (Ext Pwr):
Only charge when the engine is running, or
always. “Always” mode is meant for use only
when Voyager is plugged into the wall using the
AC adapter (if used on a vehicle, the vehicle
battery may eventually be drained.)
Power > Charge Mode:
Set the amount of time to wait (after the last
button press) until Voyager enters sleep mode
when on external battery. During sleep mode,
the screen is blank and Voyager conserves
power.
Power > Power-Save > Turn Off:
Voyager shuts down after the allotted time to
conserver power.
Menu »
Set Menu
Summary of Contents for Trail Tech
Page 1: ...MOTO GPS...