Voyager BARNVIEW1, User Manual

Page: 9 / 117

Note:
If the camera is located within 3 – 5 feet from the monitor and the camera's volume on the
receiver is turned on, then you may hear a whistling noise on the monitor which is the
feedback picked up by the microphone. In this case please locate the camera further away
from the monitor to prevent this noise.
If the power connection to the camera is kept outdoors, ensure the connection is suitably
protected.
For further details on the installation of the camera bracket and fixings, please refer to the
Camera Installation section.
Set Up the Monitor
1. Flip out the stand, extend the antenna, connect AC/DC adapter to the input on the
side of the monitor.
To Wireless Camera
Connect the AC/DC adapter
to the nearest socket