APPS1_RevA_1/19
5
Detailed Descriptions:
Setup Options
Bank 1: Add / Remove Remote Controls
To Auto Program a remote control:
1. Cycle the ignition key to ON 5x, Ending in ON.
2. The system will beep one (1) time, indicating you have accessed Bank 1, Remote Control Programming.
3. Press the ARM button of each remote control you wish to program. The system will beep to indicate the remote
control is programmed.
4. Turn the ignition key to OFF to exit programming mode, or cycle the ignition key OFF/ON to advance to the next
Feature Bank.
To delete a remote control:
This system will store a
maximum of four (4) remote controls
in the memory. Additional programmed remote controls
will delete the oldest-programmed remote control.
Remote control programming is located in Feature Bank 1. This system will Auto Program all remote functions.
Security Control (Bank 2)
See page 10 for Programming Instruction.
1 Chirp
2 Chirp
3 Chirp
4 Chirp
5 Chirp
6 Chirp
7 Chirp
8 Chirp
1 Auto Arming
OFF
ON
2 Anti Hi-Jacking
OFF
ON
3 Tilt Sensor Level
1
5
15
30
4 Silent Mode
OFF
ON
5 Security Notification
Siren
Horn
6 Parking Light Output
ON
OFF
7 Shock Sensor Level
1
2
3
4
5
6
7
8
8 Aux Ch.3 Output
1sec Pulse
Latch ON/OFF Latch Until IGN
9 Override Method
Default
Custom Code
10 Default All Features
OFF
ON
Feature Bank 2
Fe
at
ur
es
Options
Feature 1:
Automatic Arming
Function:
Set the system to arm automatically.
Setting Choices:
• Option 1 -
System will arm
only when the alarm is armed from the remote control.
• Option 2 -
System will arm
automatically 1 minute after pressing Disarm
, and when the alarm is armed from
the remote control. To Cancel: Cycle the ignition ON.
Feature 2:
Anti Hi-Jacking
Function:
Set Anti Hi-Jacking Feature ON/OFF
Setting Choices:
• Option 1 -
Anti Hi-Jacking is
Disabled
.
• Option 2 -
Anti Hi-Jacking is
Enabled.
Note:
This feature must be activated from the remote control when needed.
