APPS1_RevA_1/19
3
12. WHITE/BLACK – Siren / Horn Output (+/-)
The WHITE/BLACK wire supplies 12-Volt (+) to power the siren. After mounting the siren, connect its BLACK wire to a
reliable ground source, and connect the WHITE/BLACK wire to the siren’s RED wire.
Detailed Descriptions:
Wire Harness Colors and Functions
11. DARK BLUE – AUX CH 3 Output
At its default setting, the DARK BLUE wire connects to any external accessory and supplies Ground (-) when activated
from the remote control.
14. BLACK/WHITE – RF Antenna
The BLACK/WHITE wire is the system's RF Antenna. This length of this wire should not be changed. Avoid coiling this wire
as operating range will be diminished. When installed, the antenna should extend out from the main module.
10. LIGHT GREEN – Additional Sensor Input (-)
The LIGHT GREEN wire connects a device or switch that, when triggered, supplies a Ground (-) output. If the system is
armed, this input will trigger the alarm.
13. RED/BLUE – LED Output (+/-)
The RED/BLUE wires are used to control the alarm LED. These wire can be extended if needed.
9. PURPLE/WHITE – Loop Trigger Input (-)
The PURPLE/WHITE wire is used as a Loop Alarm Trigger. If the loop is closed (Connected) when the alarm is armed, the
alarm will trigger if the loop is opened (Disconnected). If the loop is open when the alarm is armed, the Loop Trigger will
be ignored. This can be used to protect the user's helmet or other personal belongings.
