background image

6

ca6155 Owners revA

 Carjack Mode (Anti-Hijack Mode)

 

This feature must be turned on in system programming, please consult your installing 

dealer.  

 

Triggering Carjack mode: While the ignition is ON and press and hold 

 +   for 2 

seconds, the parking lights will flash 1 time and the system will act as follows;

   

1.   50 seconds after being triggered the siren will chirp for 15 seconds,  

 

 

during this 15 seconds you will be alerted to push the valet button to  

 

 

turn off Carjack mode. If Carjack mode is not turned off at this time it  

 

 

will advance to the next step.

   

2.   Following the 15 second chirps (total time now 65 seconds) the siren  

 

 

will go into full sound and the parking lights will start flashing.

   

3.  90 seconds after trigger in, addition to the siren and parking lights, the  

 

 

system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS  

 

 

STATE UNTIL THE BATTERY IS DEPLETED.

  OVERRIDE THE SYSTEM TO TURN OFF CARJACK MODE: Turn the ignition OFF 

then On and press the valet button within 10 seconds. 

 Manually Overriding the Security System

 

Your system can be disarmed without the use of the transmitter. This is necessary, 

since you will need the ability to operate your vehicle if the transmitter is lost or its 

battery fails. To by-pass the alarm system;

 

 

1.    Open the vehicle door.  The alarm will sound.

 

 

2.    Turn the ignition key to the ON position.

 

 

3.    Within 10 seconds, press and release the valet push button switch.

 

The alarm system will stop sounding.  You can now start and operate the vehicle 

normally.

 User Selectable LED

 

  This feature will control whether the LED is ON or OFF when the system is Armed/

Locked and can be toggled ON or OFF without entering the programming feature 

banks.

 

 

1.   Turn the ignition ON, OFF, ON, OFF.

 

 

2.   Press and release the valet/programming button 3 times. The system  

 

 

will respond with 1 chirp for ON or 2 chirps for OFF.

Summary of Contents for Code Alarm Professional Series ca6155





















Reviews: