background image

11

2017 Voxx Electronics Corporation. All rights reserved.

 Operating the 2 / 3 Hour Start Up Timer Mode

 

The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period. 

This feature is especially useful in cold climates where the only means to keep the 

engine and engine fluids warm is to periodically start the engine. The default setting 

is 3 hour, Selection between  2 or 3 hour is made in option programming.

 

WARNING!

 

Be certain that the vehicle is outdoors before using this or any remote starting 

device.  A running engine produces dangerous carbon monoxide fumes which can be 

harmful or fatal if prolonged exposure occurs.  DO NOT remote start the vehicle if it is 

garaged.

  

To begin the 2 / 3 hour start up timer mode:

  

1.    Turn the vehicle’s ignition ON then OFF.

   

2.    Press and hold the valet button.

   

3.  Press the 

 button 4 times, the system will; 

   

 

 

a.   When set for 3 Hour (default) - chirp 2 times and flash the  

 

 

 

 

parking lights 4 times.

   

 

 

b.   When set for 2 Hour - chirp 1 time and flash the parking  

 

 

 

 

lights 2 times.

   

4.  Release the valet button.

  
  

To exit the 2 / 3 hour start up timer mode:

  

1.  Turn the vehicle’s Ignition ON.

  

 

OR

   

2.   Activate the remote vehicle start feature using the remote control.

Summary of Contents for Code Alarm Professional Series ca6155





















Reviews: