PROGRAMMABLE FEATURES:
Feature
LtsFlash1X
Lts Flash 2X
Lts Flash 3X
Lts Flash 4X
Default
1. Run Time
5 Min.
10 Min.
15 Min.
20 Min.
10 Min.
2. Ign. 2
Off during start
On during start
On
3. Parking Lights ON
Flash
ON
4. Tach Mode
Tachless
Tach
Tach
8
5. Voltage Level > 0.5V B4 Start
< 0.5V B4 Start
> 0.5V
6. Diagnostics
Off
On
Off
7. Start Time
0.8Sec
1.0 Sec
1.5 Sec
2.0 Sec
1.0
8. Gas/Diesel
Gas
Diesel 10
Diesel 15
Diesel 20
Gas
To Program Features:
1. Turn the ignition key to the ON position.
2. Press and release the program switch 3 times.
3. Immediately turn the ignition key OFF, then back to ON.
4. Press and release the program switch 2 times
5. Use the program switch to advance to the feature that you want to change.
EXAMPLE
- If you need to change
programmable feature number 3, press and release the program switch 3 times in succession. The parking
lights will flash 3 times confirming that selected feature 3 can now be programmed.
7. Press The Vehicle's Brake to change the selection of the programmable feature. If you are not sure what the
setting for any feature is, press the brake one time, the parking lights will flash once or twice, etc... indicating
the features setting.
NOTE:
Once you enter the feature-programming mode, do not allow more that 15 seconds to pass between
steps, or the programming will be terminated.
Summary of Contents for CA-420
Page 13: ......
