Voxtel VS600, Service Manual

Page: 41 / 83

VS600 Service Manual
VOXTEL Technical Documentation 41
6 Disassembly/Assembly Procedure
6.1
Care should be taken while processing the disassembly and reassembly of VS600 in
order to prevent from damaging the housing and internal components. The
board-to-board and display FPC (Flexible Printed Circuit cable) are vulnerable and
couldn’t bear too stress. Ensure that a properly grounded high impedance conductive
wrist strap is used while performing these procedures on electronic units.
NOTE: Many of the integrated circuit devices used in this equipment are
vulnerable to damage from static char re that adequate static
protection is in place when handling, shipping, and servicing the internal
components of this equipment.
6.2 Recommended Tools
Anti-Static Mat (Ground Cord included)
Anti-Static Wrist Strap
Torque Screw Driver (T5 type, torque is set to 1.2kg-cm)
Screw Driver (Plus)
Tweezers
Disassembly bladed tool
Introduction
ges. Ensu