Voxson HD50, User Manual

Page: 8 / 26

5
VOXSON HD50
CONNECT YOUR EQUIPMENT
HOW TO GET GOOD RECEPTION
•
In general you are not required to change the existing antenna. However if your antenna
is not in good condition you should consider replacing them to ensure uninterrupted digital
television viewing.
•
Viewers in areas of poor analogue reception may need specialists’ advice about
antenna requirements for digital reception in their area.
•
It’s recommended that viewers use quad shielded cable from the antenna to the
television.
Connections to a TV
There are several ways of connecting your STB to the TV and Hi-Fi System. For high
definition viewing your display must support either 576p, 720p, 1080i resolution. Also the
connection between the STB and display must be YPbPr component, VGA, or HDMI.
Other connection will provide standard definition viewing.
METHOD 1. Connect the STB via Video and Audio (for general viewing
/connection to a VCR)
1. Connect your terrestrial antenna to Antenna IN socket on the rear of your receiver.
2. Using 3RCA cable (yellow, white and red) provided, connect to the VIDEO and
AUDIO R and AUDIO L connections on the rear of the box. Be sure that the colour
matches the plugs.
3. Using a S-VHS cable (not provided), connect the STB to the TV. The audio
connection is as above (Item 2).