32 |
P a g e
DOC-MN-007-03 VCCM600 User Manual
Vox Power Limited | Unit 2, Red Cow Interchange Estate, Ballymount, Dublin 22, D22 Y8H2, Ireland | T +353 1 4591161 | www.vox-power.com
Configuring Your VCCM Product
The VCCM600 power supply is designed to be used as part of an end-system in a restricted environment and therefore should only be accessible to qualified and
trained personnel. Persons attempting to configure a unit must have the necessary knowledge and training before doing so. Incorrect configuration may cause
damage to the power supply and may affect the warranty of the power supply.
Output power modules may be added, replaced or moved by strictly following the sequence of operations described below.
Before configuring your VCCM product, remove the VCCM600 input module and any output modules which are going to be used in the configuration from their
packaging and inspect for damage.
DO NOT use parts if any part of the product exhibits any kind of physical damage.
DO NOT connect any mains power before the configuration is complete.
Once configuration changes have been completed, operation of the unit should be verified and voltages can be adjusted to application requirements.
Please contact Vox Power or your distributor for assistance in configuring your power supply. Never assume, always ask.
