Level
6
Note: The UI information is
only for reference, the actual UI
may be different.
During the leveling process,
please do not touch the
filament tube and nozzle
cable.
！
11
Leveling operation video can be found on Voxelab Youtube channel
Check the steadiness of the build
plate before leveling. If the build
plate is unsteady, please use an
open-end wrench to adjust the
V-wheel to steady it.
请浏览优酷“Voxelab3d打印”自频道，查看最新调平视频。
调平平台前请确认一下平台有无晃动；
若有，请使用开口扳手调节一下左右两
侧v型轮松紧度，使得平台滑动顺畅且
无晃动。
注意：界面仅供参考，实际以UI
为准。
调平过程中，请不要触碰导丝
管及喷头排线。
调平
