Install spool holder
3
Step: Put two M4x6 screws and two M4 T nuts into the material rack (as shown), place the spool
holder on the rack and fix on the profile with screws (as shown).
M4 T nuts *2
Hexagon socket button
head screws M4x6 *2
M4x6
M4 T nut
Connect the filament tube
Back
Install it on the right
08
Material rack *1
Material pipe and nut *1
安装料架
M4 T型螺母 *2
内六角平圆头螺钉M4x6 *2
料架 *1
料架筒及料架螺母 *1
将料架筒及料架螺母安装在料架上，用2颗M4x6螺钉及2颗T型螺母将组装好的料架固定在顶部型材上。
M4 T型螺母
连接导丝管
背面
靠设备顶部右侧安装
