manualshive.com logo in svg

Vox Valvetronix ToneLab SE, Owner'S Manual

Share
Download
Vox Valvetronix ToneLab SE Owner'S Manual Download Page 51

AMP TYPE

CABINET

TYPE

PEDAL

MODULA

TION

DELA

Y

REVERB

Amp/Effect

41

4. BI CHORUS     M

ONO

 I

N

/M

ONO

 O

UT

 1 (M

ODE

=S)     S

TEREO

 I

N

/

S

TEREO

 O

UT

 1 (M

ODE

=P1, P2, P3)

This is a chorus model unique to ToneLabSE. It provides two chorus units, CHO-
RUS 1 and CHORUS 2, and lets you connect the two units not only in series or in 
parallel, but also to synchronize or de-synchronize the two LFOs. It produces a 
variety of tones that cover a range from wonderfully spacious sounds to bizarre 
flanger-like sounds with complex modulation.

5. DUO PHASE (DUO PHAS)     M

ONO

 I

N

/M

ONO

 O

UT

 2 (M

ODE

=S1, 

S2) S

TEREO

 I

N

/S

TEREO

 O

UT

 2 (M

ODE

=P1, P2, P3)

This is an amazing phaser that provides two six-stage phasers; PHASER 1 and 
PHASER 2. They can be connected in series (to make a pseudo-twelve-stage 
phaser!) or in parallel, and you can also synchronize or de-synchronize the two 
LFOs.

[6] “MIX”

0.0–10.0

* Adjusts the mix amount of the effect sound.

CONTROL pedal

If you set the FLN TRIG: CONTROL pedal setting 
to “FLN TRIG,” the LFO will be reset to the posi-
tion specified by OFFSET whenever you operate 
the pedal. (p.56 Control pedal settings)

[1] “SPEED 1” 0.100–10.00 [Hz] * Adjusts the modulation speed of CHORUS 1.
[2] “DEPTH”

0.0–10.00

* Adjusts the modulation depth of CHORUS 1/2.

[3] “RESO”

0.0–10.0

* Adjusts the amount of resonance for CHORUS 

1/2.

[4] “SPEED 2” 0.100–10.00 [Hz] * Adjusts the modulation speed of CHORUS 2.

NOTE: 

This will not function if MODE is set to P2 or P3.

[5] “MODE”

S/P1/P2/P3

Specifies the connection and LFO for CHORUS 
1/2.
S: CHORUS 1/2 are connected in series.
P1: CHORUS 1/2 are connected in parallel.
P2: CHORUS 1/2 are connected in parallel, and 

their LFOs are synchronized.

P3: CHORUS 1/2 are connected in parallel, and 

their LFOs are synchronized in opposite 
phase (Stereo mode).

NOTE: 

If P2 or P3 is selected, the speed is adjusted by the SPEED 1 

knob.

[6] “MIX”

0.0–10.0

* Adjusts the mix amount of the effect sound.

[1] “SPEED 1” 0.100–10.00 [Hz] * Adjusts the modulation speed of PHASER 1.
[2] “DEPTH”

0.0–10.0

* Adjusts the modulation depth of PHASER 1/2.

[3] “RESO”

0.0–10.0

* Adjusts the amount of resonance for PHASER 

1/2.

[4] “SPEED 2” 0.100–10.00 [Hz] * Adjusts the modulation speed of PHASER 2.

NOTE: 

This will not function if MODE is set to S2, P2, or P3.

Summary of Contents for Valvetronix ToneLab SE



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands