VOX electronics WM1065-SYTQD, Operating Instructions Manual

Page: 21 / 154

EN - 17
Start/Pause button
By pressing on the Start/Pause button,
you may start the programme you have
selected or suspend a running programme.
If you switch your machine to the standby
mode, the Start/Pause led on the electronic
display will blink.
5.8 Child Lock
The Child Lock function allows you to lock
the buttons so that the wash cycle you have
chosen cannot be changed unintentionally.
To activate child lock, press and hold
button 2 and 3 simultaneously for at least
3 seconds. ‘’CL’’ will flash on the electronic
display for 2 seconds when the child lock is
activated.
If any button is pressed or selected
programme is changed by the programme
dial while the child lock is active, the “CL”
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and
a programme is running, when the
programme dial is turned to the CANCEL
position and another programme is selected
the previously selected programme
continues from where it was left.
To deactivate the child lock, press and hold
button 2 and 3 simultaneously for at least
3 seconds until the “CL” symbol on the
electronic display disappears.
5.9 Cancelling the Programme
To cancel a running programme at any
time:
1. Turn the programme dial to the “STOP”
position.
2. Your machine will stop the washing
operation and the programme will be
cancelled.
3.
Turn the programme dial to any other
programme to drain the machine.
4. Your machine will perform the
necessary draining operation and
cancel the programme.
5.
You can now select and run a new
programme.
5.10 Programme End
Your machine will stop by itself as soon as
the programme you have selected finishes.
• “- -” will flash on the electronic display.
• You can open the machine’s door and
remove the laundry.
• Leave the door of your machine open
to allow the inner part of your machine
to dry.
• Switch the programme dial to STOP
position.
• Unplug your machine.
• Turn the water tap off.