VOX electronics KK3600F, User Manual

Page: 14 / 148

ENG - 13 -
Humidity controler
When the humidity controler in the closed position,
it allows fresh fruit and vegetables to be stored
longer.
In case of the crisper is totally full, the fresh dial is
located in front of crisper, should be opened. By
means of this the air in the crisper and humidity
rate will be controlled and endurance life will be
increased.
If you see any condensation on glass shelf, humidity control should be taken into the open
positions.
Adjustable door shelf
Six different height adjustments can be made to provide storage areas that you need by
adjustable door shelf.
To change the position of adjustable door shelf ;
Hold the bottom of the shelf and pull the buttons on
the side of the door shelf direction of arrow (Fig.1).
Position door shelf the height you need by moving
up and down. After you get the position that you
want the door shelf, release the buttons on the side
of the door shelf (Fig.2) Before releasing the door
shelf, move up down and make sure the door shelf
is fixed.
Note: Before moving door shelf is loaded, you must hold the shelf by supporting the bottom.
Otherwise, door shelf could fall off the rails due to the weight. So damage may occur on the
door shelf or rails.
Fig. 2
Fig. 1
(In some models)
Visual and text descriptions on the accessories section may
vary according to the model of your appliance.
Chiller shelf
Keeping food in the Chiller compartment instead of the
freezer or refrigerator compartment allows food retain
freshness and flavour longer, while preserving its fresh
appearance. When chiller tray becomes dirty, remove it and
wash it with water.
(Water freezes at 0°C, but foods containing salt or sugar
freeze at temperature lower than that)
Normally people use the chiller compartment for raw fish,
lightly pickled, rice, etc...
Do not put foods you want to freeze or ice trays in order to make ice.
Removing the Chiller shelf
• Pull the chiller shelf out toward you by sliding on rails.
• Pull the chiller shelf up from rail to remove.
(In some models)
(In some models)