VOX electronics 8606019600174, Operating Instructions Manual

Page: 6 / 61

SPRAYING
• Press the spray button to spray water on clothes, as often as
required.
Note: When using the water spray function, ensure that there is enough
water in the water tank, and you may have to pump the spray button
several times the first time you use the iron in order to start the spraying
function.
BURST OR VERTICAL STEAM IRONING
• Press the burst of Steam button to generate a powerful burst of
steam that can penetrate the fabrics and smooth the most difficult
and tough creases. Wait for a few seconds before pressing again.
• By pressing the Burst of Steam Button at intervals you can also iron
vertically (curtain, hung garments, etc.)
Note: The burst steam function can only be used at high temperature.
Stop the emission when the pilot light turns on, and then start ironing
again only after the pilot light has turned off.
ANTI-CALC SYSTEM
A special filter inside the water tank softens the water and prevents scale
build-up in the soleplate. The filter is permanent and does not need
replacing.
AUTO SHUT-OFF (For models with “A” in the type designation
only)
An electronic safety device will automatically switch the heating element
off if the iron has not been moved more than 30 seconds in a horizontal
position. If in a vertical position, this will happen after 8 minutes. To
indicate that the heating element has been switched off, the atuo-off pilot
light will start blinking.
• When picking up the iron again, the auto-off pilot light will turn off.
The power pilot light will turn on.This indicates that the iron is
heating up again.
• Wait for the power pilot light to turn off. Then the iron is ready for use.
4