VOX electronics 8606019600174, Operating Instructions Manual

Page: 5 / 61

FILLING WITH WATER
• We recommend distilled water use.
• Make sure that both the Steam Control turning Knob and
Temperature Control Dial are in “OFF” position.
• Hold the iron upright so that the water-filling inlet is in a horizontal
position.
• Fill with water through Water Filling Inlet until the water reach the
“MAX” mark indicated on the side of the iron, and never fill above
this mark.
SETTING TEMPERATURE
Follow the ironing instructions on the garment label. If there is no
instruction but you do know the kind of fabric, please consult the
following table.
Note: If the fabric consists of various kinds of fabrics, always select the
temperature required by the most delicate fabrics.
Fabric T e m perature control Te m p era u tre requirem ent
Silk
•
Low te m p e ra ture
W o o l
· ·
M edium te m p e ra ture
C otton, linen
· · ·
High te m p e ra ture
STEAM IRONING
• Place the iron in a vertical position and set the temperature control
dial at the minimum/low heat setting.
• Insert the plug into the socket, and then turn the temperature
control dial to the “high heat” marking. The pilot light will come on,
indicating that the iron is heating up.
• When the pilot light turns off, the set temperature has been
reached and the iron is ready to use.
• During ironing ,the pilot light on the iron automatically switches
on/off as the thermostat maintains the set temperature(you may
continue ironing during this process).
• Turn the steam control turning knob to the required position.
• Steam is produced as soon as the iron is held horizontally.
3