- 4 -
Trouble-shooting:
The display does not show any data:
-
All solar controllers are in stand-by mode and do not supply data.
-
Check, if the Solar Data Extender is connected to the solar controller by observing the LEDs at
the unit.
-
Check the operating voltage (battery) of the solar controller at IN1.
Technical Data
Nominal Voltage (supply via the connected devices)
12 V / 24 V
Operating Voltage Range
8...32 V
Current Draw During Stand-by, Typically
0.7 mA
Current Draw During Activity (typically)
10 mA
Ambient Conditions, Humidity of Air
max. 95 % RH, no condensation
Dimensions
75 x 47 x 24 mm
Weight
approx. 37 g
Mark of Conformity
CE
Delivery Scope:
Solar Data Extender 3n1
3 Pcs. Control Cable 6-pins 0.5 m length
Available Accessories:
Extension Control Cable 5 m length Order No. 2005
Declaration of Conformity:
In accordance with the provisions of Directives 2014/35/EU, 2014/30/EU, 2009/19/EC, this
product complies with the following standards or normative documents:
EN55014-1; EN55022 B; EN61000-6-1; EN61000-4-2; EN61000-4-3; EN61000-4-4;
EN62368-1; EN50498.
Disposal of the
product in the
household
waste is not
allowed.
The product conforms to RoHS.
It complies with the directive
2011/65/EU
for
Reduction
of
Hazardous Substances in electrical
and electronic equipment.
Subject to misprints, errors and technical modification without notice.
All rights reserved, particularly the right of reproduction. Copyright © VOTRONIC 01/2020.
Made in Germany by
VOTRONIC Elektronik-Systeme GmbH, Johann-Friedrich-Diehm-Str. 10, 36341 Lauterbach/GERMANY
Phone: +49 (0)6641/91173-0, Fax: +49 (0)6641/91173-10, E-mail: [email protected], Internet: www.votronic.de
