2 The use of the Ortholumm light device
Ortholumm light therapy device is used as a support therapy to the
medical treatment or as a stand-alone therapy (wellness, cosmetics).
Please read the instructions for use carefully. In case of more serious
medical conditions consult your treating physician prior to the use of
the Ortholumm light therapy device. Ortholumm light therapy device is
not a substitute for medical treatment.
The device is not intended for use in direct contact with skin.
Slika 1: Naprava Ortholumm
2.1 Turning the device on/off
Connect the device to the power supply and plug it in the socket.
Press the On key ( ) for a few seconds to turn it on.
Use the “M” key to set the desired program. The Ortholumm device offers a choice of vari
-
ous programmes (1-15), as well as the choice of individual frequencies (programmes 16-23).
After a short while the LED lights turn on automatically.
Frequencies change within an individual programme; the change of frequency is announced
by a short beep.
The device turns off automatically after the end of the programmed treatment time. The
treatment times differ depending on the selected program.
If you wish to turn off the device before the programme is finished, use the button.
After the treatment remove the device and store it in a proper place.
LED display to show the
selected program
Power on /off
Program selection key
ventilation slots
connector for
power Supply
RADIATION AREA
LEDs - 625nm
LEDs - 660nm
LEDs - 850nm
handle
4
