X's-Drive
VP2060
12
Care for the unit:
Please carefully insert and remove the memory card from each slot.
Do not drop, jar, bump, shock the unit, or expose to severe vibration while data is
being transmitted .
To reduce the risk of electronic shock, do not remove cover (or back)
To reduce the risk of fire or shock hazard, do not expose this equipment to rain, any
liquid or moisture.
6. Troubleshooting.
Problem
While connected to the
computer, the X's-drive II
works great, but I cannot
download files from the
memory cards in the
stand alone mode.
Why sometimes the data
in memory card
transfered into Hard
Drive looks faulty on PC.
When I disconnect the
X's-drive II from the
computer , I get a
message that I
disconnected a device in
an unsafe way.
Cause
The disk or the memory
cards are not formated
to the FAT file systems
There may be a chance
of corrupt data or the
memory card is
damaged.
The devices have not
been stopped before
disconnecting the X's-
drive II.
Solution
To work in the stand-alone
mode, both the disk and the
memory cards must be
formated to the FAT or FAT-32
file systems.
Please back up the data in
the memory card and run
ScanDisk, Dsik Defragmenter
or reformat the memory card.
• Under Windows, the 4
devices must be stopped by
the Stop hardware utility.
• Under MacOS, the mounted
devices must be thrown to
the bin.
• Under Linux, the mounted
devices must be unmounted
by the
umount
command.
