X's-Drive
VP2060
11
If an erroneous display /operation occurs:
When the icom indicator of error & corresponding memory card light up, there may
be a chance of corrupt data or the memory card is damaged, you can change
another memory card or the main unit will be automatically switched off after 45
seconds.
If any shut dowm caused by erroneous operation, you can depress the [reset] button
located on the at the right side to switch off the main unit.
If the unit operated via USB on to PC while the batteries are low, erroneous display /
operation may occur, if this happens, unplug the USB cable, and press the [reset]
button.
Care for the Hard Drive:
If the computer or X's-Drive II can not detect the Hard Drive, check the suggested
solutions:
• Check the flat connector is pluged securely or not
• Driver is not install-then reinstall
• Formated the Hard Disk under Windows 2000
Please don't use force when connecting the flat cable with the unit and Hard Drive.
To keep your hard drive in better operating performance, we recommend to
periodically run Scan Disk and Disk Defragmenter.
Hard Drive must be formated to the FAT or FAT-32 format, NTFS format is not
compatible with this function.
DOS (FAT-32) volumes are not adequately formated by MacOS x, so that the X's-
drive II must not be formated under this environment.
