Vortice VORT ARTIK, Instruction Booklet

Page: 34 / 44

Step 1: Fix the support of outdoor
1. Select installation location according to the house structure.
2. Fix the support of outdoor unit on the selected location with expansion screws.
NOTE:
installing the outdoor unit.
● Make sure the support can withstand at least
four times of the unit weight.
● The outdoor unit should be installed at least 3cm
● For the unit with cooling capacity of 2300W
~5000W , 6 expansion screws are needed;
for the unit with cooling capacity of 6000W
~8000W , 8 expansion screws are needed;
for the unit with cooling capacity of 10000W
~16000W, 10 expansion screws are needed.
Step 2: Install drain joint
(Only for cooling and heating unit)
1. Connect the outdoor drain joint into the hole on the
chassis, as shown in the picture below.
2. Connect the drain hose into the drain vent.
Step 3: Fix outdoor unit
1. Place the outdoor unit on the support.
2. Fix the foot holes of outdoor unit with bolts.
at least 3cm above
drain joint
Installation of outdoor unit
foot holes
32