34
230/1/50
230/1/50
400/3+N/50
400/3+N/50
400/3+N/50
12 VDC / 24 VAC
INSTALLATION OPERATIONS AND MAINTENANCE MANUAL - RXC/Hi SERIES
005
010
015
025
035
16.2 Electrical data
The following electrical data refer to the basic unit without accessories.
In all other cases, refer to the electrical data in the wiring diagram attached to the unit.
The supply voltage must not vary more than ± 10% of the nominal value and the unbalance between phases
must be less than 1% according to EN 60204.
Please contact our technical department in case these tolerances are not respected.
MODEL
Power supply
V/Ph/Hz
Control circuit
Electrical data may change without notice. Therefore, ALWAYS refer to the wiring diagram supplied with the
unit.
16.3 Power supply connection
Remove the front panel of the electrical cabinet with the appropriate tool; use the cable gland on the side panel of the cabi-
net and connect the power supply cable inside the electrical cabinet to the disconnecting switch with fuses. After making the
connection, carefully close the front panel of the electrical cabinet.
POWER SUPPLY
CABLE
FRONTAL PANEL OF
TECHNICAL COMPARTMENT
CABLE GLAND
